Manually adjusting an automatic adjustment arm typically requires unlocking it first, followed by fine-tuning. The specific steps are as follows:
1. Locate the locking mechanism on the automatic adjustment arm and unlock it. This usually involves a button or lever located at either end or on the side of the arm. Press or toggle it to release the lock.
2. Once unlocked, you can adjust the arm to your desired position by rotating, extending, or compressing it. Achieving a precise adjustment may require some time and patience.
3. If further fine-tuning is required, you can use a small wrench or other tool to tighten or loosen the nuts or bolts on the adjustment arm. This allows for adjustments within a smaller, more precise range.
4. Once the arm has been adjusted to a satisfactory position, re-lock it to ensure stability and prevent accidental movement.
Please note that different devices and automatic adjustment arms may have varying operating procedures. Before you begin, be sure to consult the device's user manual for the correct operating steps and safety precautions.
